Astro Baby / Telstar lava lamp bulb: 30W screw fit

£9.80

30% Off when you spend £65 or more
30% When you buy more than 1 bulb
Spare or replacement 30W SES screw fit bulb for Astro Baby and Telstar lava lamps. Please make sure you check the lamp base to see what fitting you have. Mathmos bulbs produce the perfect heat and light to power the unique Mathmos flow.

Free delivery within 2 – 5 days
Further info here

No quibble returns
Further info here

Multiple Secure Payment Methods
We accept these following payment types:
payment_types

Further info here

Specifications & Instructions

Light: 30W Halogen reflector spot bulb - E14/SES 240V
Notice: This bulb is primarily used as a heat source. For Mathmos lava lamps only. Not for household room illumination.
Bulb Care and handling IMPORTANT! FITTING MATHMOS HALOGEN BULBS
  1. Handle the bulb with great care; halogen bulbs are extremely delicate.
  2. Allow the bulb to warm to room temperature.
  3. Made sure your lava lamp is in the correct position.
  4. Use a tissue to hold the bulb; deposits on our fingers can damage the bulb.GU10 bulbs: Carefully push the two prongs of the bulb down into the socket and turn it a quarter-turn clockwise until it stops rotating.
    SES bulbs: Carefully screw the bulb in and rotate clockwise for three turns or until it meets resistance.
  5. Place the bottle on the base delicately.
  6. Turn the lamp on using the inline switch.
Important
  1. Never touch the bulb or the lamp when it is on.
  2. Allow the light to cool for one hour before touching the bulb or lamp.
  3. Do not run your lava lamp for more than 6 hours at any one time.
  4. Always leave the bottle sitting on the base when you turn it on.

Browse other categories